MP-100 Product Manual |
Controller Board |
Features
|
|
|
|
|
|
||
| General Specifications | ||
| Mechanism Model: | MP111MP-24G-A & MP115MP-24G-A (red/black printing) | |
| Print method | Impact dot matrix | |
| Print direction | Bi-directional | |
| Number of columns | 32 (7 x 9 half dot) | |
| Character font | 7 x 9(half dot) or 5 x 9 | |
| Dot spacing (mm) | 0.30 (H) x 0.353 (V) | |
| Total number of dots | 160 dot / line | |
| Line spacing | 1 / 144" | |
| Print speed | Approx. 3.85 lines / sec. | |
| Paper feed speed | Approx.3.77 inches / sec. | |
| Carriage | Type | DC motor |
| motor | Supply voltage | DC24V ± 1.2V |
| Start current | Max. approx. 1.6A | |
| Average current | Approx. 0.15A | |
| Paper feed | Type | PM type stepping motor |
| motor | Supply voltage | DC24V±V1.2 in operation |
| DC4.2V in idle | ||
| Average current | Approx. 0.28A | |
| Holding current | Approx.0.08A | |
| Print head | Supply voltage | DC24V ± 2.4V |
| Current | Max.1.0A/solenoid | |
| (for 24 VDC, 375µs) | ||
| Ink | Media | Cartridge cassette |
| ribbon | Life (characters) | RC100P(Purple)1.5million |
| RC100B(Black)0.8million | ||
| Paper | Media | Roll paper |
| Type | Ordinary and carbonless copy paper | |
| Width | 2.25" (57.5mm) with options, 1.75" (44.5mm) | |
| Thickness | 0.07mm to 0.10mm (Single copy) | |
| Copies | Three ply-max. 0.2mm | |
| Each paper should be 0.05mm to 0.08mm in thickness | ||
| Reliability | MCBF | 4 million lines |
| Print head | 70 million characters | |
| Operating conditions | 0°C to 50° | |
| 10% to 80% RH | ||
| (w/o condensation) | ||
| Storage conditions | -20°C to 70°C | |
| 5% to 95% RH | ||
| (w/o condensation) | ||
| Voltage | Mechanism | 24V±10% |
| Logic | 5V±5% approx.60mA | |
| Weight | Approx. 0.410 kg/Approx. 0.450 kg for MP115 | |